PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10159052
10159052 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,BEARING GUIDE is a the manufacturer industrial component. Key specifications include end_item_identification: JET ENGINE MODEL F104, general_characteristics_item_description: CRES,1.570 IN. LG,0.080 IN.

THK IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-801-7545, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10159052
NSN: 5340-00-801-7545
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
end_item_identificationJET ENGINE MODEL F104
general_characteristics_item_descriptionCRES,1.570 IN. LG,0.080 IN. THK IN
NSN5340-00-801-7545
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10159052 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 1.250 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTNICKEL OVERALL
OVERALL HEIGHT1.313 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.188 INCHES NOMINAL IN
WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.250 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.500 INCHES NOMINAL IN
LENGTH1.063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
1BUpgraded Successor
successor cross-reference
successor
BW55Interchangeable
interchangeable cross-reference
interchangeable
1-WBInterchangeable
interchangeable cross-reference
interchangeable
569-012-095Interchangeable
interchangeable cross-reference
interchangeable
10-914Interchangeable
interchangeable cross-reference
interchangeable
7103-382-100Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10159052?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10159052?
10159052 is a RETAINER,BEARING GUIDE.
What parts can replace 10159052?
There are 8 known substitutes for 10159052: 1B, BW55, 1-WB and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10159052?
10159052 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-801-7545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10159052

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026