PartsTable
Technical Data Sheet
Download PDF

10158339-2 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10158339-2: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: ONE 8-32 UNC-2B THREADED HOLE LONGITUDINALLY THROUGH FIRST LEG, style_designator: ANGLE, second_leg_length: 0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-409-0883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10158339-2
NSN: 5340-00-409-0883
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresONE 8-32 UNC-2B THREADED HOLE LONGITUDINALLY THROUGH FIRST LEG
style_designatorANGLE
second_leg_length0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
surface_treatmentANODIZE
first_leg_thickness0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
second_leg_thickness0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
second_leg_hole_diameter0.260 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
second_leg_hole_arrangement_styleONE HOLE
material_document_and_classificationQQ-A-225/9,T651 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-409-0883
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10158339-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG LENGTH: 0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9,T651 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.260 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG LENGTH0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9,T651 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10158339-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10158339-2?
10158339-2 is a BRACKET,ANGLE.
What is the NSN for 10158339-2?
10158339-2 is cataloged in the U.S. Government catalog under NSN 5340-00-409-0883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10158339-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.