PartsTable
Technical Data Sheet
Download PDF

10154119 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10154119: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.259 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, diameter: 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN, flange_diameter: 0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN, groove_diameter: 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, flange_thickness: 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, special_features: COUNTESINK FLANGE END 0.125 IN. MIN,0.145 IN.

MAX DIA BY 90.0 DEG IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-108-7882, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10154119
NSN: 5340-01-108-7882
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
length0.259 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
diameter0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
flange_diameter0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
groove_diameter0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
flange_thickness0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
special_featuresCOUNTESINK FLANGE END 0.125 IN. MIN,0.145 IN. MAX DIA BY 90.0 DEG IN
style_designatorFLANGED WITH LEFT INTERNAL THREAD
cross-sectional_shapeROUND
NSN5340-01-108-7882
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10154119 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
•
LENGTH: 0.259 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
GROOVE DIAMETER: 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLANGED WITH LEFT INTERNAL THREAD
•
DIAMETER: 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: ROUND
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
LENGTH0.259 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FLANGE THICKNESS0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
GROOVE DIAMETER0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
STYLE DESIGNATORFLANGED WITH LEFT INTERNAL THREAD
DIAMETER0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEROUND
SPECIAL FEATURESCOUNTESINK FLANGE END 0.125 IN. MIN,0.145 IN. MAX DIA BY 90.0 DEG IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
74A450848-2001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10154119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10154119?
10154119 is a STANDOFF,THREADED,SPACING.
What parts can replace 10154119?
There is 1 known substitute for 10154119: 74A450848-2001. Substitute compatibility should be verified for your specific system.
What is the NSN for 10154119?
10154119 is cataloged in the U.S. Government catalog under NSN 5340-01-108-7882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10154119

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.