PartsTable
Technical Data Sheet
Download PDF

10153975 — BUSHING,SLEEVE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10153975: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include corner_shape: SQUARE ALL CORNERS, overall_length: 1.3200 INCHES NOMINAL IN, body_inside_diameter: 0.1900 INCHES MINIMUM AND 0.1910 INCHES MAXIMUM IN, body_outside_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-924-2382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10153975
NSN: 5325-00-924-2382
NIINs: 009242382, 011320573
FSC: 5325 — Fastening Devices
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
corner_shapeSQUARE ALL CORNERS
overall_length1.3200 INCHES NOMINAL IN
body_inside_diameter0.1900 INCHES MINIMUM AND 0.1910 INCHES MAXIMUM IN
body_outside_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
NSN5325-00-924-2382
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10153975 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EYELET HEIGHT: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
DISTANCE BETWEEN FLANGES: 0.146 INCHES NOMINAL IN
•
LARGEST OUTSIDE DIAMETER: 0.617 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
TURNLOCK EYELET STYLE: EYELET
•
EYELET INSIDE DIAMETER: 0.354 INCHES NOMINAL IN
•
SMALLEST OUTSIDE DIAMETER: 0.494 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS
EYELET HEIGHT0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
DISTANCE BETWEEN FLANGES0.146 INCHES NOMINAL IN
LARGEST OUTSIDE DIAMETER0.617 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
TURNLOCK EYELET STYLEEYELET
EYELET INSIDE DIAMETER0.354 INCHES NOMINAL IN
SMALLEST OUTSIDE DIAMETER0.494 INCHES MINIMUM AND 0.499 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
40G21-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10153975?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10153975?
10153975 is a BUSHING,SLEEVE.
What parts can replace 10153975?
There is 1 known substitute for 10153975: 40G21-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 10153975?
10153975 is cataloged in the U.S. Government catalog under NSN 5325-00-924-2382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10153975