PartsTable
Technical Data Sheet
Download PDF

1015-616-7358 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1015-616-7358: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL UNS J03001, material_document_and_classification: QQ-S-681, CLASS 65-35 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-616-7358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1015-616-7358
NSN: 5340-00-616-7358
FSC: 5340 — Hardware, Commercial
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL UNS J03001
special_featuresPROTECTIVE FINISH:METHOD A1.1 ORA1.2 PLUS B2.1 PER DWG A9347218. END END DIAMETER:4.000,AND BORE DIAMETER :2.812 MINIMUM AND 2.843 MAXIMUM. 3 HOLES EQUALLY SPACED 0.641 MINIMUM ANDAND 0.657 MAXIMUM
material_document_and_classificationQQ-S-681, CLASS 65-35 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-616-7358
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1015-616-7358 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-681, CLASS 65-35 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL UNS J03001
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-681, CLASS 65-35 FED SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESPROTECTIVE FINISH:METHOD A1.1 ORA1.2 PLUS B2.1 PER DWG A9347218. END END DIAMETER:4.000,AND BORE DIAMETER :2.812 MINIMUM AND 2.843 MAXIMUM. 3 HOLES EQUALLY SPACED 0.641 MINIMUM ANDAND 0.657 MAXIMUM
MATERIALSTEEL UNS J03001
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1015-616-7358?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1015-616-7358?
1015-616-7358 is a SEAT,HELICAL COMPRESSION SPRING.
What is the NSN for 1015-616-7358?
1015-616-7358 is cataloged in the U.S. Government catalog under NSN 5340-00-616-7358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1015-616-7358