PartsTable
Technical Data Sheet
Download PDF

1015-515-7133 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1015-515-7133: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, surface_treatment: PHOSPHATE OVERALL, pin_overall_length: 2.609 INCHES MINIMUM AND 2.641 INCHES MAXIMUM IN, first_hole_diameter: 0.140 INCHES NOMINAL IN, pin_overall_diameter: 0.5580 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-515-7133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1015-515-7133
NSN: 5315-00-515-7133
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
surface_treatmentPHOSPHATE OVERALL
pin_overall_length2.609 INCHES MINIMUM AND 2.641 INCHES MAXIMUM IN
first_hole_diameter0.140 INCHES NOMINAL IN
pin_overall_diameter0.5580 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
second_hole_diameter0.140 INCHES NOMINAL IN
first_end_taper_angle14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
first_end_taper_length0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes2.172 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN
NSN5315-00-515-7133
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1015-515-7133 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.140 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.5580 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.609 INCHES MINIMUM AND 2.641 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.140 INCHES NOMINAL IN
FIRST END TAPER ANGLE14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.5580 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.609 INCHES MINIMUM AND 2.641 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.140 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES2.172 INCHES MINIMUM AND 2.203 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1015-515-7133?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1015-515-7133?
1015-515-7133 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 1015-515-7133?
1015-515-7133 is cataloged in the U.S. Government catalog under NSN 5315-00-515-7133. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1015-515-7133

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.