PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1014-H-8
1014-H-8 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 12.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.625 INCHES NOMINAL IN, connection_style: SWIVEL NUT, FLARELESS FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-151-3724, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1014-H-8
NSN: 4720-01-151-3724
FSC: 4720
CAGE: 60756 — CEPEDA ASSOCIATES, INC. DBA CEPEDA ASSOCIATES INC (USA)
SPECIFICATIONS
seat_angle12.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.625 INCHES NOMINAL IN
connection_styleSWIVEL NUT, FLARELESS FIRST END
outside_diameter1.010 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure11000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.062 INCHES FIRST END IN
NSN4720-01-151-3724
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 1014-H-8 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
•
THREAD QUANTITY PER INCH: 12 FIRST END
•
OUTSIDE DIAMETER: 1.010 INCHES NOMINAL IN
•
INSIDE SURFACE CONDITION: SMOOTH
•
MEASURING METHOD AND LENGTH: 15.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
THREAD QUANTITY PER INCH12 FIRST END
OUTSIDE DIAMETER1.010 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
MEASURING METHOD AND LENGTH15.000 INCHES NOMINAL OVERALL IN
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
INSIDE DIAMETER0.625 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUN FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
FM70Interchangeable
interchangeable cross-reference
interchangeable
52011Interchangeable
interchangeable cross-reference
interchangeable
209539H1Interchangeable
interchangeable cross-reference
interchangeable
1014-D103Interchangeable
interchangeable cross-reference
interchangeable
3011105C-8-8-8-15.00Interchangeable
interchangeable cross-reference
interchangeable
2311105-8-8-8-15.00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1014-H-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1014-H-8?
1014-H-8 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 1014-H-8?
There are 11 known substitutes for 1014-H-8: FM70, 52011, 209539H1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1014-H-8?
1014-H-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-151-3724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1014-H-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026