PartsTable
Technical Data Sheet
PartsTable / MRO / 1014-36
1014-36 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

- Holds a notebook and protects it against dirt and scratches;<br>- Messenger bag with a large main compartment<br>- Padded, removable notebook compartment with soft inside lining;<br>- Zipped compartment under the lid;<br>- Flat handle on the back;<br>- Adjustable padded shoulder strap. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-072-1291, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1014-36
NSN: 5999-00-072-1291
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)
SPECIFICATIONS
equipment_nameBRADLEY M2A2 ODS GTS COFT VIRTUAL TRAINER
manufacturer_address3200 CROSS CREEK PARKWAY AUBURN HILLS, MI 48326
part_name_assigned_by_controlling_agencyTRAINER, ARMORED VEHICLE, UNIT CONDUCT OF FIRE
NSN5999-00-072-1291
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 1014-36 MFR Hama 1014-36
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.468 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.218 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.468 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.468 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.750 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OVERALL LENGTH1.687 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.750 INCHES NOMINAL IN
APERTURE DIAMETER0.218 INCHES NOMINAL IN
OVERALL WIDTH1.687 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.468 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
901PInterchangeable
interchangeable cross-reference
interchangeable
101436Interchangeable
interchangeable cross-reference
interchangeable
998PInterchangeable
interchangeable cross-reference
interchangeable
101436-1Interchangeable
interchangeable cross-reference
interchangeable
806346-B ITEM 13Interchangeable
interchangeable cross-reference
interchangeable
30-101436Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 1014-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1014-36?
1014-36 is a 1014-36 manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1014-36?
There are 8 known substitutes for 1014-36: 901P, 101436, 998P and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1014-36?
1014-36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-072-1291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1014-36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026