PartsTable
Technical Data Sheet
Download PDF

10138438 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10138438: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 1.550 INCHES NOMINAL IN, style_designator: THRU-HOLE, body_outside_diameter: 0.590 INCHES MINIMUM IN, opening_inside_diameter: 0.820 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-410-7480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10138438
NSN: 5340-01-410-7480
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height1.550 INCHES NOMINAL IN
style_designatorTHRU-HOLE
body_outside_diameter0.590 INCHES MINIMUM IN
opening_inside_diameter0.820 INCHES MINIMUM IN
NSN5340-01-410-7480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10138438 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.820 INCHES MINIMUM IN
•
BODY OUTSIDE DIAMETER: 0.590 INCHES MINIMUM IN
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.550 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.820 INCHES MINIMUM IN
BODY OUTSIDE DIAMETER0.590 INCHES MINIMUM IN
STYLE DESIGNATORTHRU-HOLE
MATERIALPLASTIC POLYOLEFIN BODY
SUBSTITUTES & CROSS-REFERENCES 2
2037AS557-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
2037AS557Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10138438?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10138438?
10138438 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 10138438?
There are 2 known substitutes for 10138438: 2037AS557-04, 2037AS557. Substitute compatibility should be verified for your specific system.
What is the NSN for 10138438?
10138438 is cataloged in the U.S. Government catalog under NSN 5340-01-410-7480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10138438