PartsTable
Technical Data Sheet
Download PDF

10138435 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10138435: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYOLEFIN BODY, overall_height: 1.540 INCHES NOMINAL IN, style_designator: THRU-HOLE, base_inside_diameter: 1.140 INCHES MINIMUM IN, opening_inside_diameter: 0.430 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-410-7642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10138435
NSN: 5340-01-410-7642
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN BODY
overall_height1.540 INCHES NOMINAL IN
style_designatorTHRU-HOLE
base_inside_diameter1.140 INCHES MINIMUM IN
opening_inside_diameter0.430 INCHES MINIMUM IN
NSN5340-01-410-7642
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10138435 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.430 INCHES MINIMUM IN
•
STYLE DESIGNATOR: THRU-HOLE
•
BASE INSIDE DIAMETER: 1.140 INCHES MINIMUM IN
•
MATERIAL: PLASTIC POLYOLEFIN BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.540 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.430 INCHES MINIMUM IN
STYLE DESIGNATORTHRU-HOLE
BASE INSIDE DIAMETER1.140 INCHES MINIMUM IN
MATERIALPLASTIC POLYOLEFIN BODY
SUBSTITUTES & CROSS-REFERENCES 2
2037AS622Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
2037AS622-02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10138435?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10138435?
10138435 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 10138435?
There are 2 known substitutes for 10138435: 2037AS622, 2037AS622-02. Substitute compatibility should be verified for your specific system.
What is the NSN for 10138435?
10138435 is cataloged in the U.S. Government catalog under NSN 5340-01-410-7642. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10138435