PartsTable
Technical Data Sheet
10138010 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN, inside_diameter_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-191-4898, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10138010
NSN: 5340-00-191-4898
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN
inside_diameter_length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
NSN5340-00-191-4898
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10138010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
INSIDE DIAMETER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
MATERIAL: PLASTIC
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
OVERALL DIAMETER: 1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
MATERIALPLASTIC
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER1.609 INCHES MINIMUM AND 1.671 INCHES MAXIMUM IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
EP-24 PE-LD01 YEL002Upgraded Successor
successor cross-reference
successor
EP24Upgraded Successor
successor cross-reference
successor
NAS820Upgraded Successor
successor cross-reference
successor
NAS820-24Upgraded Successor
successor cross-reference
successor
4270-24YUpgraded Successor
successor cross-reference
successor
10128861Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10138010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10138010?
10138010 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 10138010?
There are 24 known substitutes for 10138010: EP-24 PE-LD01 YEL002, EP24, NAS820 and 21 more. Substitute compatibility should be verified for your specific system.
Is 10138010 still available?
10138010 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10138010