The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include body_height: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, features_provided: MONOLITHIC AND HIGH SLEW RATE AND EXTERNALLY COMPENSATED AND HIGH IMPEDANCE AND WIDEBAND, precious_material: GOLD, inclosure_material: METAL, storage_temp_range: -65.0 TO 125.0 CELSIUS DEGC, operating_temp_range: -55.0 TO 125.0 CELSIUS DEGC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-01-176-1500, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_height | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| features_provided | MONOLITHIC AND HIGH SLEW RATE AND EXTERNALLY COMPENSATED AND HIGH IMPEDANCE AND WIDEBAND |
| precious_material | GOLD |
| inclosure_material | METAL |
| storage_temp_range | -65.0 TO 125.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| body_outside_diameter | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| input_circuit_pattern | 2 INPUT |
| inclosure_configuration | CAN |
| terminal_surface_treatment | GOLD |
| terminal_type_and_quantity | 8 PIN |
| specification/standard_data | 81349-MIL-M-38510/122 GOVERNMENT SPECIFICATION |
| NSN | 5962-01-176-1500 |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL TYPE AND QUANTITY | 8 PIN |
| STORAGE TEMP RANGE | -65.0 TO 125.0 CELSIUS DEGC |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| BODY OUTSIDE DIAMETER | 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| INCLOSURE CONFIGURATION | CAN |
| INCLOSURE MATERIAL | METAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | A-1 MIL-M-38510 |
| BODY HEIGHT | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 20.0 VOLTS MAXIMUM POWER SOURCE |