PartsTable
Technical Data Sheet
Download PDF

10130358 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10130358: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN, diameter: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.109 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-032-1873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10130358
NSN: 5315-00-032-1873
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
height0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
diameter0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.109 INCHES NOMINAL IN
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
pin_head_diameter0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR ZINC OVERALL
under_head_length1.594 INCHES MINIMUM AND 1.614 INCHES MAXIMUM IN
first_hole_diameter0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
NSN5315-00-032-1873
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10130358 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.109 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.594 INCHES MINIMUM AND 1.614 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
DIAMETER: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.109 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.594 INCHES MINIMUM AND 1.614 INCHES MAXIMUM IN
PIN CHAMFER ANGLE40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
DIAMETER0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES 3
43BC13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
200054Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
233263Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10130358?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10130358?
10130358 is a PIN,STRAIGHT,HEADED.
What parts can replace 10130358?
There are 3 known substitutes for 10130358: 43BC13, 200054, 233263. Substitute compatibility should be verified for your specific system.
What is the NSN for 10130358?
10130358 is cataloged in the U.S. Government catalog under NSN 5315-00-032-1873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10130358

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.