PartsTable
Technical Data Sheet
Download PDF

10130267 — CHAMBER,AIR BRAKE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10130267: CHAMBER,AIR BRAKE.

The CHAMBER,AIR BRAKE is a the manufacturer industrial component. Key specifications include stroke_length: 1.750 INCHES IN, special_features: STUD MTD, line_connection_thread_size_and_series/type_designator: 0.250-18 NPTF. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-180-0011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10130267
NSN: 5305-00-180-0011
NIINs: 001800011, 005917177
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
stroke_length1.750 INCHES IN
special_featuresSTUD MTD
line_connection_thread_size_and_series/type_designator0.250-18 NPTF
NSN5305-00-180-0011
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10130267 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
•
EXTENDED WASHER DIAMETER: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
HEAD HEIGHT0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
EXTENDED WASHER DIAMETER0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
THREAD LENGTH0.359 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEROUND EXTENDED WASHER
SUBSTITUTES & CROSS-REFERENCES 2
AN525-10R9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8812629Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 10130267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10130267?
10130267 is a CHAMBER,AIR BRAKE.
What parts can replace 10130267?
There are 2 known substitutes for 10130267: AN525-10R9, 8812629. Substitute compatibility should be verified for your specific system.
What is the NSN for 10130267?
10130267 is cataloged in the U.S. Government catalog under NSN 5305-00-180-0011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10130267

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.