CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE, body_width: 0.090 INCHES NOMINAL IN, body_height: 0.290 INCHES NOMINAL IN, body_length: 0.290 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-018-8934, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC CASE |
| body_style | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| body_width | 0.090 INCHES NOMINAL IN |
| body_height | 0.290 INCHES NOMINAL IN |
| body_length | 0.290 INCHES NOMINAL IN |
| terminal_length | 1.250 INCHES MINIMUM IN |
| terminal_diameter | 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN |
| reliability_indicator | ESTABLISHED |
| nonderated_operating_temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| terminal_type_and_quantity | 2 UNINSULATED WIRE LEAD |
| tolerance_range_per_section | -10.00 TO 10.00 PERCENT SINGLE SECTION |
| schematic_diagram_designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| NSN | 5910-01-018-8934 |
| TEST DATA DOCUMENT | 81349-MIL-C-39014/2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CAPACITANCE VALUE PER SECTION | 2200.000 PICOFARADS SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 2.5000 |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHM-MICROFARADS |
| MATERIAL | PLASTIC CASE |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| TERMINAL DIAMETER | 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN |
| VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |