PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10125495
10125495 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, head_style: FLAT CHAMFER, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-788-8401, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10125495
NSN: 5305-00-788-8401
FSC: 5305
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
head_styleFLAT CHAMFER
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL B MINIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-788-8401
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10125495 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: HEXAGON
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
INTERNAL DRIVE STYLEHEXAGON
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
NOMINAL THREAD DIAMETER0.138 INCHES IN
END ITEM IDENTIFICATIONA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
WIDTH ACROSS FLATS0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
92200A146Interchangeable
interchangeable cross-reference
interchangeable
N28P13006Interchangeable
interchangeable cross-reference
interchangeable
100A900014Interchangeable
interchangeable cross-reference
interchangeable
66910111-1Interchangeable
interchangeable cross-reference
interchangeable
NAS1352C06-6Interchangeable
interchangeable cross-reference
interchangeable
8635-1405-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10125495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10125495?
10125495 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 10125495?
There are 10 known substitutes for 10125495: 92200A146, N28P13006, 100A900014 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10125495?
10125495 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-788-8401. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10125495

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026