PartsTable
Technical Data Sheet
Download PDF

10125241 — RESISTOR,THERMAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10125241: RESISTOR,THERMAL.

The RESISTOR,THERMAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, body_length: 0.380 INCHES NOMINAL IN, grip_length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, thread_class: 3A A, cubic_measure: 0.080 CUBIC CENTIMETERS. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-364-9544, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10125241
NSN: 5305-00-364-9544
NIINs: 003649544, 007874957
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
body_length0.380 INCHES NOMINAL IN
grip_length1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
thread_class3A A
cubic_measure0.080 CUBIC CENTIMETERS
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
inclosure_typeENCAPSULATED
fastener_length1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
terminal_length1.380 INCHES NOMINAL IN
NSN5305-00-364-9544
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10125241 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM IN
THREAD LENGTH0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
GRIP DIAMETER0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 3
HT4025L4-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11905-4L17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M454-4L17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10125241?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10125241?
10125241 is a RESISTOR,THERMAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10125241?
There are 3 known substitutes for 10125241: HT4025L4-17, 11905-4L17, ST3M454-4L17. Substitute compatibility should be verified for your specific system.
What is the NSN for 10125241?
10125241 is cataloged in the U.S. Government catalog under NSN 5305-00-364-9544. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10125241

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.