PartsTable
Technical Data Sheet
Download PDF

10124967 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10124967: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 OVERALL, head_style: HEADLESS (SETSCREW), point_style: HALF DOG, thread_class: 3A A, thread_length: 0.375 INCHES MINIMUM IN, fastener_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-082-1892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10124967
NSN: 5305-00-082-1892
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 4037 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleHALF DOG
thread_class3A A
thread_length0.375 INCHES MINIMUM IN
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
precious_materialSILVER
surface_treatmentSILVER OVERALL
internal_drive_styleSIX SPLINE
spline_major_diameter0.049 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
spline_minor_diameter0.037 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
NSN5305-00-082-1892
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10124967 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPLINE MINOR DIAMETER: 0.037 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
PRECIOUS MATERIAL: SILVER
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
•
SPLINE MAJOR DIAMETER: 0.049 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SPLINE MINOR DIAMETER0.037 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
PRECIOUS MATERIALSILVER
THREAD LENGTH0.375 INCHES MINIMUM IN
SPLINE MAJOR DIAMETER0.049 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEHALF DOG
SURFACE TREATMENTSILVER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
75416Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10124967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10124967?
10124967 is a SETSCREW.
What parts can replace 10124967?
There is 1 known substitute for 10124967: 75416. Substitute compatibility should be verified for your specific system.
What is the NSN for 10124967?
10124967 is cataloged in the U.S. Government catalog under NSN 5305-00-082-1892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10124967

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.