PartsTable
Technical Data Sheet
Download PDF

10124952 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10124952: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN, thread_length: 0.137 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN, fastener_length: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-068-5395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10124952
NSN: 5305-00-068-5395
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
thread_length0.137 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
fastener_length0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.0781 INCHES MINIMUM AND 0.0791 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-068-5395
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10124952 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.0781 INCHES MINIMUM AND 0.0791 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.137 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.0781 INCHES MINIMUM AND 0.0791 INCHES MAXIMUM IN
FASTENER LENGTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.137 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 2
MS24667-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LTCT13873Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10124952?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10124952?
10124952 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 10124952?
There are 2 known substitutes for 10124952: MS24667-7, LTCT13873. Substitute compatibility should be verified for your specific system.
What is the NSN for 10124952?
10124952 is cataloged in the U.S. Government catalog under NSN 5305-00-068-5395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10124952

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.