1012333C — GASKET

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1012333C: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.290 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.890 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN, overall_length: 3.060 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN, special_features: TWO BOLT HOLES 1.531 IN. DIA; ONE BOLT HOLE 0.562 IN.

DIA IN, outside_edge_to_bolt_hole_center_distance_along_width: 0.235 INCHES NOMINAL IN, outside_edge_to_bolt_hole_center_distance_along_length: 0.235 INCHES NOMINAL IN. This part is cataloged in the U.S. Government catalog under NSN 5330-00-923-1102, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1012333C

NSN: 5330-00-923-1102
FSC: 5330 — Packing and Gasket Materials
CAGE: 77068 — ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV (USA)

SPECIFICATIONS

hole_diameter	0.290 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width	1.890 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN
overall_length	3.060 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
special_features	TWO BOLT HOLES 1.531 IN. DIA; ONE BOLT HOLE 0.562 IN. DIA IN
bolt_hole_quantity	4
outside_edge_to_bolt_hole_center_distance_along_width	0.235 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length	0.235 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width	1.420 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length	3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN	5330-00-923-1102

COMPONENT DIAGRAM

KEY FEATURES

•

BOLT HOLE QUANTITY: 4

•

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN

•

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.420 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN

•

OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.235 INCHES NOMINAL IN

•

HOLE DIAMETER: 0.290 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN

TECHNICAL CHARACTERISTICS

OVERALL LENGTH	3.060 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
OVERALL WIDTH	1.890 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURES	TWO BOLT HOLES 1.531 IN. DIA; ONE BOLT HOLE 0.562 IN. DIA IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.420 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.235 INCHES NOMINAL IN
HOLE DIAMETER	0.290 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.235 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 1

1012233Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 1012333C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1012333C?

1012333C is a GASKET.

What parts can replace 1012333C?

There is 1 known substitute for 1012333C: 1012233. Substitute compatibility should be verified for your specific system.

What is the NSN for 1012333C?

1012333C is cataloged in the U.S. Government catalog under NSN 5330-00-923-1102. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1012333C — GASKET

Request a Quote — 1012333C