PartsTable
Technical Data Sheet
Download PDF

10123136 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10123136: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.046 INCHES NOMINAL IN, diameter: 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT, chamfer_length: 0.046 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-142-0474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10123136
NSN: 5315-01-142-0474
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
height0.046 INCHES NOMINAL IN
diameter0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT
chamfer_length0.046 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.312 INCHES NOMINAL IN
under_head_length1.709 INCHES MINIMUM AND 1.729 INCHES MAXIMUM IN
material_document_and_classificationAMS5735 A286 ASSN STD 1ST MATERIAL RESPONSE OR AMS5737 A286 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5315-01-142-0474
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10123136 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.046 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 1.709 INCHES MINIMUM AND 1.729 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5735 A286 ASSN STD 1ST MATERIAL RESPONSE OR AMS5737 A286 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.046 INCHES NOMINAL IN
UNDER HEAD LENGTH1.709 INCHES MINIMUM AND 1.729 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.312 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5735 A286 ASSN STD 1ST MATERIAL RESPONSE OR AMS5737 A286 ASSN STD 2ND MATERIAL RESPONSE OVERALL
DIAMETER0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM IN
HEAD STYLEFLAT
HEIGHT0.046 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
3M39C2-55Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10123136?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10123136?
10123136 is a PIN,STRAIGHT,HEADED.
What parts can replace 10123136?
There is 1 known substitute for 10123136: 3M39C2-55. Substitute compatibility should be verified for your specific system.
What is the NSN for 10123136?
10123136 is cataloged in the U.S. Government catalog under NSN 5315-01-142-0474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10123136

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.