PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10123022
10123022 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.030 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT, first_end_style: SQUARE, style_designator: GROOVE, pin_head_diameter: 0.170 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-130-9223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10123022
NSN: 5315-01-130-9223
FSC: 5315
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
height0.030 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT
first_end_styleSQUARE
style_designatorGROOVE
pin_head_diameter0.170 INCHES NOMINAL IN
under_head_length0.480 INCHES NOMINAL IN
NSN5315-01-130-9223
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10123022 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.170 INCHES NOMINAL IN
•
HEIGHT: 0.030 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
UNDER HEAD LENGTH: 0.480 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.170 INCHES NOMINAL IN
HEIGHT0.030 INCHES NOMINAL IN
FIRST END STYLESQUARE
UNDER HEAD LENGTH0.480 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
VS148Interchangeable
interchangeable cross-reference
interchangeable
VS248Interchangeable
interchangeable cross-reference
interchangeable
22-1650Interchangeable
interchangeable cross-reference
interchangeable
2654201Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10123022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10123022?
10123022 is a PIN,GROOVED,HEADED.
What parts can replace 10123022?
There are 4 known substitutes for 10123022: VS148, VS248, 22-1650 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10123022?
10123022 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-130-9223. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10123022

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026