PartsTable
Technical Data Sheet
Download PDF

10122730 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10122730: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, diameter: 0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, material: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), chamfer_length: 0.062 INCHES MAXIMUM IN, hardness_rating: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-811-1267, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10122730
NSN: 5315-00-811-1267
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
height0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
diameter0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
materialSTEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
chamfer_length0.062 INCHES MAXIMUM IN
hardness_rating26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
special_featuresTHE SHANK END OF PIN MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR
style_designatorSTRAIGHT
pin_chamfer_angle14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
pin_head_diameter0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
under_head_length0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
NSN5315-00-811-1267
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10122730 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
PIN CHAMFER ANGLE14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
HARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
NASM5673Reference document
Same NSN cross-reference
Reference document — Secondary reference
2310017Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS20392-1C23Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10122730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10122730?
10122730 is a PIN,STRAIGHT,HEADED.
What parts can replace 10122730?
There are 3 known substitutes for 10122730: NASM5673, 2310017, MS20392-1C23. Substitute compatibility should be verified for your specific system.
What is the NSN for 10122730?
10122730 is cataloged in the U.S. Government catalog under NSN 5315-00-811-1267. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10122730

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.