PartsTable
Technical Data Sheet
Download PDF

10122595 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10122595: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, point_type: EXTENDED PRONG SQUARE CUT, hardness_rating: 60.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 70.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL, style_designator: STANDARD, underloop_length: 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-236-8353, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10122595
NSN: 5315-00-236-8353
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
point_typeEXTENDED PRONG SQUARE CUT
hardness_rating60.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 70.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
style_designatorSTANDARD
underloop_length1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
material_document_and_classificationASTM A493 ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-236-8353
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10122595 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 60.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 70.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A493 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
UNDERLOOP LENGTH: 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING60.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 70.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
STYLE DESIGNATORSTANDARD
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
UNDERLOOP LENGTH1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OVERALL
POINT TYPEEXTENDED PRONG SQUARE CUT
SUBSTITUTES & CROSS-REFERENCES 6
MS24665-306Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN381-3-22Reference document
Same NSN cross-reference
Reference document — Secondary reference
13767Reference document
Same NSN cross-reference
Reference document — Secondary reference
5315PL0157258Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS9245&50Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-P-386Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10122595?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10122595?
10122595 is a PIN,COTTER.
What parts can replace 10122595?
There are 6 known substitutes for 10122595: MS24665-306, AN381-3-22, 13767 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10122595?
10122595 is cataloged in the U.S. Government catalog under NSN 5315-00-236-8353. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10122595

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.