PartsTable
Technical Data Sheet
Download PDF

10122080 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10122080: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, nut_style: HEXAGON, nut_height: 0.150 INCHES NOMINAL IN, thread_class: 2B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-071-8160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10122080
NSN: 5310-01-071-8160
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
nut_styleHEXAGON
nut_height0.150 INCHES NOMINAL IN
thread_class2B
thread_seriesUN
thread_directionRIGHT-HAND
surface_treatmentSILVER OVERALL
width_across_flats1.125 INCHES NOMINAL IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.039 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
hole_type_and_quantity2 DRILLED
NSN5310-01-071-8160
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10122080 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.125 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UN
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
NUT HEIGHT: 0.150 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.125 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUN
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
NUT HEIGHT0.150 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.039 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
SURFACE TREATMENTSILVER OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
2753216-101Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10122080?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10122080?
10122080 is a NUT,PLAIN,HEXAGON.
What parts can replace 10122080?
There is 1 known substitute for 10122080: 2753216-101. Substitute compatibility should be verified for your specific system.
What is the NSN for 10122080?
10122080 is cataloged in the U.S. Government catalog under NSN 5310-01-071-8160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10122080

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.