PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10121325
10121325 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.063 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-369-6158, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10121325
NSN: 5310-00-369-6158
FSC: 5310
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.063 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM NUT
surface_treatmentCADMIUM OVERALL
width_across_flats0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
nominal_thread_size0.112 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch40
NSN5310-00-369-6158
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10121325 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 40
•
WIDTH ACROSS FLATS: 0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.063 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH40
WIDTH ACROSS FLATS0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NUT HEIGHT0.063 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1019004-022Interchangeable
interchangeable cross-reference
interchangeable
A103ATInterchangeable
interchangeable cross-reference
interchangeable
5310009349738Interchangeable
interchangeable cross-reference
interchangeable
30-297-631-03Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10121325?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10121325?
10121325 is a NUT,PLAIN,HEXAGON.
What parts can replace 10121325?
There are 4 known substitutes for 10121325: 1019004-022, A103AT, 5310009349738 and 1 more. Substitute compatibility should be verified for your specific system.
Is 10121325 still available?
10121325 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10121325

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026