PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10119671
10119671 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, outside_diameter: 1.993 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN, special_features: MATERIAL INCONEL 718 PER AMS 5689 OR AMS 5596, style_designator: CIRCULAR, aperture_diameter: 1.708 INCHES MINIMUM AND 1.728 INCHES MAXIMUM IN, cross-sectional_thickness: 0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-119-5940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10119671
NSN: 5330-01-119-5940
FSC: 5330
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
outside_diameter1.993 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN
special_featuresMATERIAL INCONEL 718 PER AMS 5689 OR AMS 5596
style_designatorCIRCULAR
aperture_diameter1.708 INCHES MINIMUM AND 1.728 INCHES MAXIMUM IN
cross-sectional_thickness0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencySEAL RING,METAL-V-FLANGE COUPLING
NSN5330-01-119-5940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10119671 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
OUTSIDE DIAMETER: 1.993 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.708 INCHES MINIMUM AND 1.728 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
MATERIALSTEEL CORROSION RESISTING OVERALL
OUTSIDE DIAMETER1.993 INCHES MINIMUM AND 1.999 INCHES MAXIMUM IN
SPECIAL FEATURESMATERIAL INCONEL 718 PER AMS 5689 OR AMS 5596
CROSS-SECTIONAL THICKNESS0.103 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL RING,METAL-V-FLANGE COUPLING
APERTURE DIAMETER1.708 INCHES MINIMUM AND 1.728 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
19173-1Interchangeable
interchangeable cross-reference
interchangeable
A3624Interchangeable
interchangeable cross-reference
interchangeable
AP106074-27MInterchangeable
interchangeable cross-reference
interchangeable
SN5427J00Interchangeable
interchangeable cross-reference
interchangeable
M50-218Interchangeable
interchangeable cross-reference
interchangeable
E15-0199-10Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10119671?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10119671?
10119671 is a GASKET.
What parts can replace 10119671?
There are 6 known substitutes for 10119671: 19173-1, A3624, AP106074-27M and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10119671?
10119671 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-119-5940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10119671

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026