PartsTable
Technical Data Sheet
Download PDF

1011957-7 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1011957-7: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: RUBBER OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 2.000 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.812 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-893-0058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1011957-7
NSN: 5905-00-893-0058
NIINs: 008930058, 010351904
FSC: 5905 — Resistor
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialRUBBER OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
body_length2.000 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.812 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.875 INCHES NOMINAL IN
overall_length2.812 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
mounting_methodSTANDARD BUSHING
section_quantity1
NSN5905-00-893-0058
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 1011957-7 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.50 INCH-OUNCES IN
•
NONTURN DEVICE LOCATION: AT 12 OCLOCK
•
BODY DIAMETER: 0.875 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 300.0 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 85.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.50 INCH-OUNCES IN
NONTURN DEVICE LOCATIONAT 12 OCLOCK
BODY DIAMETER0.875 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION300.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL IN
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
SUBSTITUTES & CROSS-REFERENCES 1
SA1610BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1011957-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1011957-7?
1011957-7 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1011957-7?
There is 1 known substitute for 1011957-7: SA1610B. Substitute compatibility should be verified for your specific system.
What is the NSN for 1011957-7?
1011957-7 is cataloged in the U.S. Government catalog under NSN 5905-00-893-0058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1011957-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.