PartsTable
Technical Data Sheet
Download PDF

10119506 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10119506: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC EPOXY AND PAPER OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 0.935 INCHES MINIMUM AND 0.939 INCHES MAXIMUM IN, center_hole_diameter: 0.764 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-582-2111, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10119506
NSN: 5330-00-582-2111
FSC: 5330 — Packing and Gasket Materials
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC EPOXY AND PAPER OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
peripheral_diameter0.935 INCHES MINIMUM AND 0.939 INCHES MAXIMUM IN
center_hole_diameter0.764 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-582-2111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10119506 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: DIAGONAL OVERALL
•
PERIPHERAL DIAMETER: 0.935 INCHES MINIMUM AND 0.939 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.764 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC EPOXY AND PAPER OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
PERIPHERAL DIAMETER0.935 INCHES MINIMUM AND 0.939 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.764 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
MATERIALPLASTIC EPOXY AND PAPER OVERALL
JOINT TYPESCARF-PERIPHERAL RETAINER
SUBSTITUTES & CROSS-REFERENCES 7
5330PL1660496Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS28774-116Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS8791Reference document
Same NSN cross-reference
Reference document — Secondary reference
5330PL1370860Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS28774Reference document
Same NSN cross-reference
Reference document — Identification reference
5330PL1632056Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10119506?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10119506?
10119506 is a RETAINER,PACKING.
What parts can replace 10119506?
There are 7 known substitutes for 10119506: 5330PL1660496, MS28774-116, SAE-AS8791 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10119506?
10119506 is cataloged in the U.S. Government catalog under NSN 5330-00-582-2111. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10119506