PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10119483
10119483 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER OVERALL, special_features: CROSS-SECTIONAL THK AT CENTER HOLE 0.024 IN. MIN,0.026 IN.

MAX IN, peripheral_diameter: 2.184 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN, center_hole_diameter: 1.965 INCHES MINIMUM AND 1.971 INCHES MAXIMUM IN, cross-sectional_height: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-498-0402, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10119483
NSN: 5330-00-498-0402
FSC: 5330
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
colorBLACK
materialRUBBER OVERALL
special_featuresCROSS-SECTIONAL THK AT CENTER HOLE 0.024 IN. MIN,0.026 IN. MAX IN
peripheral_diameter2.184 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN
center_hole_diameter1.965 INCHES MINIMUM AND 1.971 INCHES MAXIMUM IN
cross-sectional_height0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
cross-sectional_thickness0.030 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
material_document_and_classificationRTV-632,FSCM 02295 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-498-0402
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10119483 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
PERIPHERAL DIAMETER: 2.184 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: RTV-632,FSCM 02295 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
COLOR: BLACK
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECUP
PERIPHERAL DIAMETER2.184 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.030 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONRTV-632,FSCM 02295 MFR REF SINGLE MATERIAL RESPONSE OVERALL
COLORBLACK
SPECIAL FEATURESCROSS-SECTIONAL THK AT CENTER HOLE 0.024 IN. MIN,0.026 IN. MAX IN
CENTER HOLE DIAMETER1.965 INCHES MINIMUM AND 1.971 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
42200Interchangeable
interchangeable cross-reference
interchangeable
44230-00Interchangeable
interchangeable cross-reference
interchangeable
03019MInterchangeable
interchangeable cross-reference
interchangeable
3020Interchangeable
interchangeable cross-reference
interchangeable
SFL TY1 SZ1 1-2 INInterchangeable
interchangeable cross-reference
interchangeable
MIL-N-24408Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10119483?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10119483?
10119483 is a PACKING,PREFORMED.
What parts can replace 10119483?
There are 16 known substitutes for 10119483: 42200, 44230-00, 03019M and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10119483?
10119483 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-498-0402. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10119483

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026