PartsTable
Technical Data Sheet
Download PDF

10117649 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10117649: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660, overall_width: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN, overall_height: 0.235 INCHES MAXIMUM IN, overall_length: 1.296 INCHES MAXIMUM IN, style_designator: ANCHOR, material_thickness: 0.047 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-111-7432, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117649
NSN: 5340-01-111-7432
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialIRON ALLOY 660
overall_width0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN
overall_height0.235 INCHES MAXIMUM IN
overall_length1.296 INCHES MAXIMUM IN
style_designatorANCHOR
material_thickness0.047 INCHES MAXIMUM IN
mounting_hole_diameter0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
material_document_and_classificationAMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
center_to_center_distance_between_cup_and_mounting_hole0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
NSN5340-01-111-7432
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117649 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.047 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.235 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
OVERALL LENGTH1.296 INCHES MAXIMUM IN
OVERALL WIDTH0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN
MATERIAL THICKNESS0.047 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
MATERIALIRON ALLOY 660
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
NS202293-064Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M754-6Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10117649?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117649?
10117649 is a RETAINER,NUT AND BOLT.
What parts can replace 10117649?
There are 2 known substitutes for 10117649: NS202293-064, ST3M754-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117649?
10117649 is cataloged in the U.S. Government catalog under NSN 5340-01-111-7432. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117649

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.