PartsTable
Technical Data Sheet
Download PDF

10117629 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10117629: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 631 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-103-0268, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117629
NSN: 5340-01-103-0268
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 631 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
loop_inside_diameter0.250 INCHES NOMINAL IN
cushioning_environmental_protectionFLAME RESISTANT
material_document_and_classificationMIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.748 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-103-0268
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117629 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: FLAME RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.748 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTIONFLAME RESISTANT
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.748 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
SUBSTITUTES & CROSS-REFERENCES 8
9M972-4SReference document
Same NSN cross-reference
Reference document — Secondary reference
S664HT4Reference document
Same NSN cross-reference
Reference document — Secondary reference
1444PHW4BReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-C-85052/3Reference document
Same NSN cross-reference
Reference document — Secondary reference
M85052/3-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
JM44LC70WPH4SFReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10117629?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117629?
10117629 is a CLAMP,LOOP.
What parts can replace 10117629?
There are 8 known substitutes for 10117629: 9M972-4S, S664HT4, 1444PHW4B and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117629?
10117629 is cataloged in the U.S. Government catalog under NSN 5340-01-103-0268. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117629

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.