PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117598
10117598 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.312 INCHES NOMINAL IN, head_outside_diameter: 0.312 INCHES NOMINAL IN, hole_accommodation_diameter: 0.250 INCHES NOMINAL IN, material_accommodated_thickness: 0.062 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-081-2719, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117598
NSN: 5340-01-081-2719
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
head_height0.062 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
head_outside_diameter0.312 INCHES NOMINAL IN
hole_accommodation_diameter0.250 INCHES NOMINAL IN
material_accommodated_thickness0.062 INCHES MAXIMUM IN
NSN5340-01-081-2719
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117598 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ACCOMMODATION DIAMETER: 0.250 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MAXIMUM IN
•
HEAD OUTSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
TECHNICAL CHARACTERISTICS (FLIS)
HOLE ACCOMMODATION DIAMETER0.250 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.312 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MAXIMUM IN
HEAD OUTSIDE DIAMETER0.312 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1362830Upgraded Successor
successor cross-reference
successor
DP-312Upgraded Successor
successor cross-reference
successor
2613Upgraded Successor
successor cross-reference
successor
88-1-4-99 LTUpgraded Successor
successor cross-reference
successor
2603Interchangeable
interchangeable cross-reference
interchangeable
E300KR16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117598?
10117598 is a BUTTON,PLUG.
What parts can replace 10117598?
There are 20 known substitutes for 10117598: 1362830, DP-312, 2613 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117598?
10117598 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-081-2719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117598

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026