PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117503
10117503 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONTROL UNIT,SUPERVISORY,TURBINE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, overall_diameter: 1.690 INCHES NOMINAL IN, inside_diameter_length: 0.344 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 1.808 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-917-7850, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117503
NSN: 5340-00-917-7850
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
overall_diameter1.690 INCHES NOMINAL IN
inside_diameter_length0.344 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed1.808 INCHES NOMINAL IN
NSN5340-00-917-7850
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117503 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.344 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 1.690 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.808 INCHES NOMINAL IN
•
MATERIAL: PLASTIC VINYL
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH0.344 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER1.690 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.808 INCHES NOMINAL IN
MATERIALPLASTIC VINYL
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
CLHInterchangeable
interchangeable cross-reference
interchangeable
FC100Interchangeable
interchangeable cross-reference
interchangeable
FR150Interchangeable
interchangeable cross-reference
interchangeable
1011750-4Interchangeable
interchangeable cross-reference
interchangeable
2ZPH40025-0005Interchangeable
interchangeable cross-reference
interchangeable
1011750-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117503?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117503?
10117503 is a CONTROL UNIT,SUPERVISORY,TURBINE.
What parts can replace 10117503?
There are 10 known substitutes for 10117503: CLH, FC100, FR150 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117503?
10117503 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-917-7850. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117503

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026