PartsTable
Technical Data Sheet
10117454 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include drive_type: HEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD, design_type: THREADED, overall_diameter: 1.750 INCHES NOMINAL IN, nondefinitive_spec/std_data: 1 TYPE AND A CLASS AND 12 SIZE, thread_size_and_series/type_designator: 1-1/16-12 UN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-804-1252, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117454
NSN: 5340-00-804-1252
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
drive_typeHEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
design_typeTHREADED
overall_diameter1.750 INCHES NOMINAL IN
nondefinitive_spec/std_data1 TYPE AND A CLASS AND 12 SIZE
thread_size_and_series/type_designator1-1/16-12 UN
NSN5340-00-804-1252
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117454 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-1/16-12 UN
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND A CLASS AND 12 SIZE
OVERALL DIAMETER: 1.750 INCHES NOMINAL IN
DESIGN TYPE: THREADED
DRIVE TYPE: HEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-1/16-12 UN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A CLASS AND 12 SIZE
OVERALL DIAMETER1.750 INCHES NOMINAL IN
DESIGN TYPETHREADED
DRIVE TYPEHEX SOCKET OR SCREW SLOT OR SERRATED OR SQUARE HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
106065E01Upgraded Successor
successor cross-reference
successor
P-12Upgraded Successor
successor cross-reference
successor
C1UU8100AInterchangeable
interchangeable cross-reference
interchangeable
SP12Interchangeable
interchangeable cross-reference
interchangeable
AAX0768Interchangeable
interchangeable cross-reference
interchangeable
51196PC10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117454?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117454?
10117454 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 10117454?
There are 17 known substitutes for 10117454: 106065E01, P-12, C1UU8100A and 14 more. Substitute compatibility should be verified for your specific system.
Is 10117454 still available?
10117454 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117454