PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117430
10117430 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM, design_type: THREADED, thread_class: 1B, overall_diameter: 0.688 INCHES NOMINAL IN, surface_treatment: ANODIZE, inside_diameter_length: 0.563 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-682-2115, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117430
NSN: 5340-00-682-2115
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialALUMINUM
design_typeTHREADED
thread_class1B
overall_diameter0.688 INCHES NOMINAL IN
surface_treatmentANODIZE
inside_diameter_length0.563 INCHES NOMINAL IN
round_cap_outside_surface_conditionSERRATED
thread_size_and_series/type_designator9/16-18 UNIFIED NATIONAL COARSE (UNC)
NSN5340-00-682-2115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117430 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.563 INCHES NOMINAL IN
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 9/16-18 UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL: ALUMINUM
•
ROUND CAP OUTSIDE SURFACE CONDITION: SERRATED
•
THREAD CLASS: 1B
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.688 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH0.563 INCHES NOMINAL IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR9/16-18 UNIFIED NATIONAL COARSE (UNC)
MATERIALALUMINUM
ROUND CAP OUTSIDE SURFACE CONDITIONSERRATED
THREAD CLASS1B
DESIGN TYPETHREADED
OVERALL DIAMETER0.688 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
307AUpgraded Successor
successor cross-reference
successor
SH2Upgraded Successor
successor cross-reference
successor
S3123YR0010Upgraded Successor
successor cross-reference
successor
C6Upgraded Successor
successor cross-reference
successor
10539415Upgraded Successor
successor cross-reference
successor
KS17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117430?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117430?
10117430 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 10117430?
There are 19 known substitutes for 10117430: 307A, SH2, S3123YR0010 and 16 more. Substitute compatibility should be verified for your specific system.
Is 10117430 still available?
10117430 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117430

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026