PartsTable
Technical Data Sheet
Download PDF

10117410 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10117410: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include overall_width: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, overall_height: 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, overall_length: 1.156 INCHES MINIMUM AND 1.186 INCHES MAXIMUM IN, style_designator: ANCHOR, surface_treatment: CADMIUM, material_thickness: 0.200 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-596-5568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117410
NSN: 5340-00-596-5568
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006
overall_width0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
overall_height0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
overall_length1.156 INCHES MINIMUM AND 1.186 INCHES MAXIMUM IN
style_designatorANCHOR
surface_treatmentCADMIUM
material_thickness0.200 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
mounting_hole_diameter0.083 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
width_between_cup_flats0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
center_to_center_distance_between_cup_and_mounting_hole0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
NSN5340-00-596-5568
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117410 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.083 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.200 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.083 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
OVERALL LENGTH1.156 INCHES MINIMUM AND 1.186 INCHES MAXIMUM IN
OVERALL WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
MATERIAL THICKNESS0.200 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
9M157-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10117410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117410?
10117410 is a RETAINER,NUT AND BOLT.
What parts can replace 10117410?
There is 1 known substitute for 10117410: 9M157-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117410?
10117410 is cataloged in the U.S. Government catalog under NSN 5340-00-596-5568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117410

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.