PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117380
10117380 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.710 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN, open_end_inside_diameter: 1.355 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, closed_end_overall_diameter: 1.429 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-501-2405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117380
NSN: 5340-00-501-2405
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
length_under_shoulder0.710 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
open_end_inside_diameter1.355 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
closed_end_overall_diameter1.429 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
NSN5340-00-501-2405
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117380 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.710 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
•
CLOSED END OVERALL DIAMETER: 1.429 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
•
OPEN END INSIDE DIAMETER: 1.355 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER0.710 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER1.429 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
OPEN END INSIDE DIAMETER1.355 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
MATERIALPLASTIC, POLYETHYLENE (PP)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
6510676Upgraded Successor
successor cross-reference
successor
218Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117380?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117380?
10117380 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 10117380?
There are 2 known substitutes for 10117380: 6510676, 218. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117380?
10117380 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-501-2405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117380

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026