PartsTable
Technical Data Sheet
10117365 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), design_type: FRICTION, overall_diameter: 3.500 INCHES NOMINAL IN, special_features: COLOR YELLOW, inside_diameter_length: 0.340 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-462-8349, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117365
NSN: 5340-00-462-8349
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
design_typeFRICTION
overall_diameter3.500 INCHES NOMINAL IN
special_featuresCOLOR YELLOW
inside_diameter_length0.340 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
material_document_and_classificationCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed3.380 INCHES NOMINAL IN
NSN5340-00-462-8349
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117365 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
OVERALL DIAMETER: 3.500 INCHES NOMINAL IN
DESIGN TYPE: FRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 3.380 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
INSIDE DIAMETER LENGTH: 0.340 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION: CAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
OVERALL DIAMETER3.500 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR YELLOW
DESIGN TYPEFRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED3.380 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER LENGTH0.340 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
MS35140-4Upgraded Successor
successor cross-reference
successor
115Upgraded Successor
successor cross-reference
successor
375Upgraded Successor
successor cross-reference
successor
26226203-05Interchangeable
Same NIIN cross-reference
interchangeable
3-75EAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117365?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117365?
10117365 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 10117365?
There are 5 known substitutes for 10117365: MS35140-4, 115, 375 and 2 more. Substitute compatibility should be verified for your specific system.
Is 10117365 still available?
10117365 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117365