PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117326
10117326 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: ALUMINUM, drive_type: SERRATED, design_type: THREADED, thread_class: 3A A, overall_diameter: 1.500 INCHES NOMINAL IN, features_provided: BEVELED SEAT AND SHOULDER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-292-3299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117326
NSN: 5340-00-292-3299
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialALUMINUM
drive_typeSERRATED
design_typeTHREADED
thread_class3A A
overall_diameter1.500 INCHES NOMINAL IN
features_providedBEVELED SEAT AND SHOULDER
thread_size_and_series/type_designator1-5/16-12 UN
NSN5340-00-292-3299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117326 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
FEATURES PROVIDED: BEVELED SEAT AND SHOULDER
•
MATERIAL: ALUMINUM
•
DRIVE TYPE: SERRATED
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
THREAD CLASS: 3A A
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-5/16-12 UN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPETHREADED
FEATURES PROVIDEDBEVELED SEAT AND SHOULDER
MATERIALALUMINUM
DRIVE TYPESERRATED
OVERALL DIAMETER1.500 INCHES NOMINAL IN
THREAD CLASS3A A
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-5/16-12 UN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
ASP-16Upgraded Successor
successor cross-reference
successor
5340PL1450710Upgraded Successor
successor cross-reference
successor
M5501/1-16Upgraded Successor
successor cross-reference
successor
P16Upgraded Successor
successor cross-reference
successor
SP16Interchangeable
interchangeable cross-reference
interchangeable
RAD116Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117326?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117326?
10117326 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 10117326?
There are 10 known substitutes for 10117326: ASP-16, 5340PL1450710, M5501/1-16 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117326?
10117326 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-292-3299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117326

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026