PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117320
10117320 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: ALUMINUM ALLOY, overall_height: 1.450 INCHES NOMINAL IN, flange_diameter: 0.500 INCHES NOMINAL IN, flange_thickness: 0.100 INCHES NOMINAL IN, style_designator: PARALLEL, surface_treatment: OXIDE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-288-6033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117320
NSN: 5340-00-288-6033
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialALUMINUM ALLOY
overall_height1.450 INCHES NOMINAL IN
flange_diameter0.500 INCHES NOMINAL IN
flange_thickness0.100 INCHES NOMINAL IN
style_designatorPARALLEL
surface_treatmentOXIDE
body_inside_diameter0.215 INCHES NOMINAL IN
body_outside_diameter0.324 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
outside_chamfer_angle_in_deg45.0
NSN5340-00-288-6033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117320 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CHAMFER ANGLE IN DEG: 45.0
•
SURFACE TREATMENT: OXIDE
•
STYLE DESIGNATOR: PARALLEL
•
MATERIAL: ALUMINUM ALLOY
•
BODY OUTSIDE DIAMETER: 0.324 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
•
FLANGE DIAMETER: 0.500 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 0.215 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CHAMFER ANGLE IN DEG45.0
SURFACE TREATMENTOXIDE
STYLE DESIGNATORPARALLEL
MATERIALALUMINUM ALLOY
BODY OUTSIDE DIAMETER0.324 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
FLANGE DIAMETER0.500 INCHES NOMINAL IN
OVERALL HEIGHT1.450 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.215 INCHES NOMINAL IN
FLANGE THICKNESS0.100 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
52930Interchangeable
interchangeable cross-reference
interchangeable
SM-B-148543Interchangeable
interchangeable cross-reference
interchangeable
52930AInterchangeable
interchangeable cross-reference
interchangeable
4-4 070202BAInterchangeable
interchangeable cross-reference
interchangeable
SAE J514/1 4-4 070202BAInterchangeable
interchangeable cross-reference
interchangeable
AA-8705-08Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117320?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117320?
10117320 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 10117320?
There are 7 known substitutes for 10117320: 52930, SM-B-148543, 52930A and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117320?
10117320 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-288-6033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117320

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026