PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10117277
10117277 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.064 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3388, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117277
NSN: 5340-00-186-3388
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.064 INCHES NOMINAL IN
loop_inside_diameter1.750 INCHES NOMINAL IN
end_item_identificationLOGISTICS SUPPORT VESSEL
material_document_and_classificationQQ-A250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.530 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.312 INCHES NOMINAL IN
NSN5340-00-186-3388
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117277 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
MATERIALALUMINUM ALLOY 2024 BAND
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
LOOP INSIDE DIAMETER1.750 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.530 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
0640 7704Interchangeable
interchangeable cross-reference
interchangeable
8761582Interchangeable
interchangeable cross-reference
interchangeable
7552-8Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS5587Interchangeable
Same NIIN cross-reference
interchangeable
AS5587D28Interchangeable
Same NIIN cross-reference
interchangeable
5340PL1824983Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117277?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117277?
10117277 is a CLAMP,LOOP.
What parts can replace 10117277?
There are 9 known substitutes for 10117277: 0640 7704, 8761582, 7552-8 and 6 more. Substitute compatibility should be verified for your specific system.
Is 10117277 still available?
10117277 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117277

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026