PartsTable
Technical Data Sheet
Download PDF

10117178 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10117178: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.762 INCHES NOMINAL IN, center_hole_diameter: 1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-177-3435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117178
NSN: 5331-01-177-3435
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.762 INCHES NOMINAL IN
center_hole_diameter1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
NSN5331-01-177-3435
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117178 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.762 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.762 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
B-631-12505-13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-P-83461/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS83461/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
510-0-005 REV B ITEM NO. 19Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M83461/1-222Reference document
Same NSN cross-reference
Reference document — Secondary reference
GHN10089-53Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10117178?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117178?
10117178 is a O-RING.
What parts can replace 10117178?
There are 8 known substitutes for 10117178: B-631-12505-13, MIL-P-83461/1, SAE-AS83461/1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117178?
10117178 is cataloged in the U.S. Government catalog under NSN 5331-01-177-3435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117178