PartsTable
Technical Data Sheet
Download PDF

10117144 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10117144: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, temp_rating: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, special_features: STATIC SEAL USED WHILE IN CONTACT WITH FUELS SUCH AS JP-3, center_hole_diameter: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-030-6676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117144
NSN: 5331-01-030-6676
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
temp_rating-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
special_featuresSTATIC SEAL USED WHILE IN CONTACT WITH FUELS SUCH AS JP-3
center_hole_diameter0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyPACKING, PREFORMED, FLUOROSIICONE
NSN5331-01-030-6676
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117144 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
COLOR: BLUE
•
CENTER HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
COLORBLUE
SPECIAL FEATURESSTATIC SEAL USED WHILE IN CONTACT WITH FUELS SUCH AS JP-3
CENTER HOLE DIAMETER0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING, PREFORMED, FLUOROSIICONE
MATERIALRUBBER FLUOROSILICONE CLASS FQ
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
S9412-005Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10117144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117144?
10117144 is a O-RING.
What parts can replace 10117144?
There is 1 known substitute for 10117144: S9412-005. Substitute compatibility should be verified for your specific system.
What is the NSN for 10117144?
10117144 is cataloged in the U.S. Government catalog under NSN 5331-01-030-6676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117144