PartsTable
Technical Data Sheet
PartsTable / O-RING / 10117050
10117050 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.558 INCHES NOMINAL IN, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-123-2829, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117050
NSN: 5331-00-123-2829
FSC: 5331 — O-RING
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.558 INCHES NOMINAL IN
center_hole_diameter0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN5331-00-123-2829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117050 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.558 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.558 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MS9385-06ESInterchangeable
interchangeable cross-reference
interchangeable
MS9385-06Interchangeable
interchangeable cross-reference
interchangeable
MS9385-11Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9386Interchangeable
interchangeable cross-reference
interchangeable
MS9385-12Interchangeable
interchangeable cross-reference
interchangeable
S8990-579Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117050?
10117050 is a O-RING.
What parts can replace 10117050?
There are 24 known substitutes for 10117050: MS9385-06ES, MS9385-06, MS9385-11 and 21 more. Substitute compatibility should be verified for your specific system.
Is 10117050 still available?
10117050 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117050

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026