PartsTable
Technical Data Sheet
PartsTable / O-RING / 10117045
10117045 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PARTS KIT,REGULATOR BREATHING GA. Key specifications include end_item_identification: REPAIR KIT FOR MK 17 REGULATOR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-103-1766, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10117045
NSN: 5331-00-103-1766
FSC: 5331 — O-RING
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
end_item_identificationREPAIR KIT FOR MK 17 REGULATOR
NSN5331-00-103-1766
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10117045 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 3.443 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.222 INCHES MINIMUM AND 3.252 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER3.443 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS3209-152Interchangeable
interchangeable cross-reference
interchangeable
AS3085-152Interchangeable
interchangeable cross-reference
interchangeable
NSN SPECIFIC V-22 AE1107C ENGINEInterchangeable
interchangeable cross-reference
interchangeable
10117045Interchangeable
interchangeable cross-reference
interchangeable
MILR83248Interchangeable
Same NIIN cross-reference
interchangeable
ST3001-152Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10117045?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10117045?
10117045 is a PARTS KIT,REGULATOR BREATHING GA.
What parts can replace 10117045?
There are 8 known substitutes for 10117045: AS3209-152, AS3085-152, NSN SPECIFIC V-22 AE1107C ENGINE and 5 more. Substitute compatibility should be verified for your specific system.
Is 10117045 still available?
10117045 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10117045

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026