10117034 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10117034: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.994 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN, center_hole_diameter: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-001-4811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10117034

NSN: 5331-00-001-4811
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.994 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
center_hole_diameter	0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN	5331-00-001-4811

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.994 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.994 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 6

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS568-210ZZR765 CL2BGR70Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS9068-210Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-210 S604-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS3582-210Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

5331PL0972540Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10117034?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10117034?

10117034 is a O-RING.

What parts can replace 10117034?

There are 6 known substitutes for 10117034: SAE-AS3582, AS568-210ZZR765 CL2BGR70, MS9068-210 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 10117034?

10117034 is cataloged in the U.S. Government catalog under NSN 5331-00-001-4811. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10117034 — O-RING

Request a Quote — 10117034