PartsTable
Technical Data Sheet
Download PDF

10116979 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10116979: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.140 INCHES NOMINAL IN, overall_length: 1.140 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, style_designator: NON-CIRCULAR, aperture_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-446-8051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10116979
NSN: 5330-01-446-8051
FSC: 5330 — Packing and Gasket Materials
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
hole_diameter0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.140 INCHES NOMINAL IN
overall_length1.140 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
style_designatorNON-CIRCULAR
aperture_diameter0.750 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.060 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
cross-sectional_thickness0.032 INCHES NOMINAL IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
outside_edge_to_bolt_hole_center_distance_along_width0.140 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.140 INCHES NOMINAL IN
NSN5330-01-446-8051
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10116979 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 0.750 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.820 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH1.140 INCHES NOMINAL IN
OVERALL WIDTH1.140 INCHES NOMINAL IN
APERTURE DIAMETER0.750 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.820 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.820 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.140 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
1D76947-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1B48094-1 NON-ASBESTOSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10116979?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10116979?
10116979 is a GASKET.
What parts can replace 10116979?
There are 2 known substitutes for 10116979: 1D76947-1, 1B48094-1 NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for 10116979?
10116979 is cataloged in the U.S. Government catalog under NSN 5330-01-446-8051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10116979

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.