PartsTable
Technical Data Sheet
Download PDF

10116975 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10116975: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.840 INCHES NOMINAL IN, overall_length: 1.840 INCHES NOMINAL IN, special_features: NON-ASBESTOS; MATERIAL IS VELLUMOID TN-9000, style_designator: NON-CIRCULAR, aperture_diameter: 1.180 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-432-6731, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10116975
NSN: 5330-01-432-6731
FSC: 5330 — Packing and Gasket Materials
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
hole_diameter0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.840 INCHES NOMINAL IN
overall_length1.840 INCHES NOMINAL IN
special_featuresNON-ASBESTOS; MATERIAL IS VELLUMOID TN-9000
style_designatorNON-CIRCULAR
aperture_diameter1.180 INCHES NOMINAL IN
bolt_hole_quantity4
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-432-6731
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10116975 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.180 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH1.840 INCHES NOMINAL IN
OVERALL WIDTH1.840 INCHES NOMINAL IN
APERTURE DIAMETER1.180 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
SPECIAL FEATURESNON-ASBESTOS; MATERIAL IS VELLUMOID TN-9000
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
HOLE DIAMETER0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
1D76947-501Reference document
Same NSN cross-reference
Reference document — Secondary reference
75330011307820Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10116975?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10116975?
10116975 is a GASKET.
What parts can replace 10116975?
There are 2 known substitutes for 10116975: 1D76947-501, 75330011307820. Substitute compatibility should be verified for your specific system.
What is the NSN for 10116975?
10116975 is cataloged in the U.S. Government catalog under NSN 5330-01-432-6731. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10116975