PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10116732
10116732 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 SPRING, seal_width: 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, construction: SPLIT, housing_bore_diameter: 0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN, cross-sectional_shape_style: C-SECTION W/ HELICAL SPRING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-133-4501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10116732
NSN: 5330-01-133-4501
FSC: 5330
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 302 SPRING
seal_width0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
constructionSPLIT
housing_bore_diameter0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
accommodated_shaft_diameter0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
cross-sectional_shape_styleC-SECTION W/ HELICAL SPRING
material_document_and_classificationQQ-W-423,COMP 302 FED SPEC SINGLE MATERIAL RESPONSE SPRING
NSN5330-01-133-4501
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10116732 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423,COMP 302 FED SPEC SINGLE MATERIAL RESPONSE SPRING
•
CONSTRUCTION: SPLIT
•
MATERIAL: STEEL COMP 302 SPRING
•
SEAL WIDTH: 0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: C-SECTION W/ HELICAL SPRING
•
ACCOMMODATED SHAFT DIAMETER: 0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423,COMP 302 FED SPEC SINGLE MATERIAL RESPONSE SPRING
CONSTRUCTIONSPLIT
MATERIALSTEEL COMP 302 SPRING
SEAL WIDTH0.084 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEC-SECTION W/ HELICAL SPRING
ACCOMMODATED SHAFT DIAMETER0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
B0YX40Interchangeable
interchangeable cross-reference
interchangeable
300018Interchangeable
interchangeable cross-reference
interchangeable
563AInterchangeable
interchangeable cross-reference
interchangeable
02673Interchangeable
interchangeable cross-reference
interchangeable
227TTA100AInterchangeable
interchangeable cross-reference
interchangeable
651-077-9112Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10116732?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10116732?
10116732 is a SEAL,PLAIN.
What parts can replace 10116732?
There are 7 known substitutes for 10116732: B0YX40, 300018, 563A and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10116732?
10116732 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-133-4501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10116732

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026